Center Bezel

REMOVAL




1. Before proceeding with the following repair procedure, review all warnings and cautions.
2. Using a trim stick C-4755 or equivalent (1), remove the center bezel (2) from the instrument panel (3) by releasing the snap retainers from the instrument panel.




3. Disconnect the electrical connectors (3) from the A/C - heater control (4) and the switch pod and remove the center bezel (1) from the vehicle.

INSTALLATION




1. Before proceeding with the following repair procedure, review all warnings and cautions.
2. Position the center bezel (1) near the instrument panel (2).
3. Connect the electrical connectors (3) to the A/C - heater control (4) and the switch pod.




4. Install the center bezel (1) onto the instrument panel (2) and carefully push on the outside edges of the center bezel to fully seat the snap clip retainers into the instrument panel.