Instrument Cluster

REMOVAL




1. Disconnect and isolate the battery negative cable.
2.

WARNING: WAIT TWO MINUTES FOR THE AIRBAG SYSTEM RESERVE CAPACITOR TO DISCHARGE BEFORE BEGINNING ANY AIRBAG SYSTEM OR COMPONENT SERVICE. FAILURE TO DO SO MAY RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT, PERSONAL INJURY OR DEATH.

3. Remove the instrument cluster bezel.
4. Remove the four cluster retaining screws.
5. Disconnect the cluster electrical connectors.
6. Remove cluster from instrument panel.

INSTALLATION




1. Position cluster into instrument panel opening.
2. Connect the cluster electrical connectors.
3. Install the four cluster retaining screws.
4. Install the cluster bezel.
5. Connect the battery negative cable.