Rear

REMOVAL




1. Remove the screws (3 & 5).

CAUTION: Trim panel is attached to the door using hooks molded into the panel. Do not pull the trim panel straight off or damage to the panel and/or power switch assembly may occur.

2. Lift the trim panel up off the lock rod (2) and attachment hooks and separate the panel from the door slightly.
3. Disconnect the electrical connectors (6).
4. Disconnect the inside handle actuator rod (1).




5. Disconnect the electrical connector and remove the tweeter.




6. Remove the switch panel if necessary.

INSTALLATION




1. Install the switch assembly.




2. Install the tweeter and connect the electrical connector.




3. Position the trim panel (4) and connect the inside handle actuator rod (1).
4. Connect the electrical connectors (6).
5. Lift the trim panel up and onto the lock rod (2) and attachment hooks.
6. Install the screws (3 & 5).