Voice Activation Module: Service and Repair

REMOVAL






1. Disconnect and isolate the battery negative cable.
2. Remove the instrument panel end cap (3).
3. Remove the glove box.
4. Remove the door scuff plate.
5. Remove the cowl trim panel.
6. Remove the mounting fasteners.
7. Disconnect the electrical harness connector and remove the module (4).

INSTALLATION

1. Connect electrical harness connector and position module.
2. Install mounting fasteners.
3. Install the cowl trim panel.
4. Install the door scuff plate.
5. Install the glove box.
6. Install instrument panel end cap.
7. Connect battery negative cable