Removal - Rear

REMOVAL

OVERHEAD RAIL MOUNTED

1. Disconnect and isolate the negative battery cable.

2. Using a trim stick C-4755 or equivalent, gently pry the rear A/C-heater control housing off of the overhead rails. (Figure 1).






Figure 1 Rear A/C-Heater Control - MTC System Shown





3. Remove the rear A/C-heater control and housing assembly from the overhead rails and disconnect the wire harness connector(s) from the back of the control.

4. Remove the three screws that secure the rear A/C-heater control to the housing and remove the control (Figure 2).






Figure 2 Rear A/C-Heater Control Housing - MTC System Shown






HEADLINER MOUNTED

5. Disconnect and isolate the negative battery cable.

6. Using a trim stick C-4755 or equivalent, gently pry the rear top edge of the control bezel away from the headliner to release the two retaining clips (Figure 3).

7. Slide the control bezel reward to remove the rear A/C-heater control and bezel assembly from the headliner and disconnect the wire harness connector(s) from the back of the control.






Figure 3 Rear A/C-Heater Control - ATC System Shown





8. Remove the three screws that secure the rear A/C-heater control to the bezel and remove the control from the bezel (Figure 4).






Figure 4 Rear A/C-Heater Control Bezel - ATC System Shown