Installation

INSTALLATION
1. Position curtain airbag over retaining holes in roof rail and firmly snap into place (Figure 2).

2. Install the curtain airbag retaining bolts (Figure 2).

3. Engage the side curtain airbag front tether in the A-pillar and install retaining bolt (Figure 4).

4. Install the bolt in the curtain airbag inflator mounting bracket (Figure 3).

5. Install the retaining bolts at the d-pillar (Figure 1).

6. Connect the curtain airbag squib connector (Figure 5).

7. Install the headliner into the vehicle.

WARNING: DO NOT CONNECT THE BATTERY NEGATIVE CABLE. PERSONAL INJURY OR DEATH MAY RESULT IF THE SYSTEM TEST IS NOT PERFORMED FIRST. FOR THE SYSTEM TEST, Supplemental Restraints Verification Test


8. Verify vehicle and system operation.

9. Close hood.






Figure 1 CURTAIN AIRBAG D-PILLAR ATTACHMENT










Figure 2 CURTAIN AIRBAG REMOVE/INSTALL










Figure 3 CURTAIN AIRBAG INFLATOR MOUNTING BRACKET ATTACHMENT










Figure 4 CURTAIN AIRBAG FRONT TETHER ATTACHMENT










Figure 5 CURTAIN AIRBAG SQUIB CONNECTION