Installation

INSTALLATION
1. Place the knee blocker airbag into position in the instrument panel opening (Figure 1).

2. Connect the one electrical connector (Figure 2).

3. Install the five knee blocker airbag retaining bolts (Figure 1).

4. Position the steering column opening cover over retaining slots and firmly snap into place (Figure 3). Install the two retaining screws (Figure 3).

WARNING: DO NOT CONNECT THE BATTERY NEGATIVE CABLE. PERSONAL INJURY OR DEATH MAY RESULT IF THE SYSTEM TEST IS NOT PERFORMED FIRST. FOR THE SYSTEM TEST, Supplemental Restraints Verification Test

5. Verify vehicle and system operation.

6. Close hood.






Figure 1 KNEE BLOCKER AIRBAG - REMOVE/INSTALL










Figure 2 KNEE BLOCKER AIRBAG ELECTRICAL CONNECTOR










Figure 3 STEERING COLUMN OPENING COVER