Installation

INSTALLATION

1. Place interlock solenoid into position ensuring hook on end of solenoid plunger engages gearshift lever pawl pin. Install and tighten screws (Figure 1).




Figure 1 Solenoid Retaining Screw


1 - SOLENOID RETAINING SCREW (2)

2. Verify gearshift lever is in PARK (P) and connect solenoid connector (Figure 2).




Figure 2 BTSI Solenoid Connector






3. Install steering column lower shroud.
4. Install knee bolster (Figure 3).




Figure 3 Knee Bolster


1 - KNEE BOLSTER

5. Install instrument panel lower silencer (Figure 4).




Figure 4 Instrument Panel Lower Silencer


1 - INSTRUMENT PANEL LOWER SILENCER

6. Connect battery negative cable.
7. Verify proper shift interlock system operation.