Removal

REMOVAL
1. Open liftgate.

2. Remove liftgate sill plate. Refer to Trim Panel.

3. Fold third row seats in to floor well.

4. Using a trim stick, unclip anchor molding (Figure 1).

5. Remove two screws attaching front edge of floor tub carpet.






Figure 1 ANCHOR MOLDING





6. Fold seat back into the upright position.

7. Remove nuts attaching third row seat lower trim cover (Figure 2)

8. Lift rear tub carpet insert out of floor well (Figure 3).

9. Remove tub insert from vehicle






Figure 2 REAR SEAT TRIM COVER










Figure 3 REAR FLOOR TUB CARPET INSERT