Removal - 3.7L

REMOVAL - 3.7L





The electronic EGR valve and solenoid assembly (1) is attached to the rear of the left cylinder head.

1. Remove plastic windshield cowl panel.

2. Remove windshield wiper motor.





An exhaust gas routing tube (1) connects the EGR valve (4) to the intake manifold.

3. Remove two tube mounting bolts (2).

4. Remove tube (1) from solenoid (4). Slip opposite end of tube (6) from intake manifold.

5. Remove gasket (3) located between EGR valve solenoid and tube flange.




6. Disconnect electrical connector (3) at solenoid (1).

7. Remove two EGR valve solenoid mounting bolts (2).

8. Remove solenoid (1) from engine.




9. Remove and discard gasket (1) located under EGR solenoid.