Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2007 >> RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Head Assembly >> Valve Cover >> Service and Repair >> Removal and Replacement >> Removal >> Cylinder Head Cover

Cylinder Head Cover






CYLINDER HEAD COVER




1. Disconnect both negative battery cables.
2. Remove the Breather Cover Capscrews (8-M6 screws).
3. Remove the CCV breather and filter cover (3).
4. Disconnect CCV Tube (4) at the CDR valve (one spring clamp) and remove 10mm nut from tube bracket at EGR Cooler support bracket stud.
5. Disconnect CDR valve Tube to Air Inlet Silencer (Spring Clamp).
6. Disconnect CDR/Valve cover pressure sensor connector.
7. Remove Oil fill cap.
8. Remove CCV oil drains (2) from valve cover (2 hoses).
9. Disconnect both injector harness connectors (1).
10. Remove six (6) valve cover capscrews (10mm).
11. Remove the valve cover.
12. Loosen injector wire nuts from the valve cover gasket (8mm).
13. Remove gasket.
pro multis · About Operation CHARM