Removal

REMOVAL





NOTE: The procedure for replacing the stow motor assembly is the same for both the 60 and 40 third row power folding seats. The following steps should be performed only on the seat with the inoperative stow motor assembly.

1. Remove the effected third row power folding seat,Seat - Removal.
2. Remove the seat cushion and cover assembly,Seat Cushion / Cover - Removal.
3. Remove the four gear cover retaining screws (3) and the gear cover (4).
4. Disconnect the motor electrical connector (5).
5. Remove the two stow motor retaining bolts (2) and separate the motor assembly from the seat frame (1).