Bench Seat - Flat Floor

INSTALLATION

NOTE: Bench seats equipped with child restraint seats have an interlock feature that will not allow the seat back to fold forward with the child seat open.





NOTE: Passenger side shown. Driver side similar.

1. Position the seat back to the seat back hinges (3) and install the retaining bolts (1). Tighten the bolts to 48 Nm (35 ft. lbs.).
2. Adjust synchronizing cable, if equipped.
3. Install the seat back hinge coversSeat Back Hinge Covers - Installation.
4. If required, install the armrestsArmrest - Installation.
5. If required, install the headrestsHeadrest - Installation.