Removal

REMOVAL





1. Apply a length of masking tape on the body, parallel to the top edge of the nameplate to use as a guide, if necessary.




2. Apply a length of masking tape on the body, parallel to the top edge of the nameplate to use as a guide, if necessary.

NOTE: Exterior nameplates are attached to body panels with adhesive tape.

3. If temperature is below 21°C (70°F) warm emblem with a heat lamp or gun. Do not exceed 52°C (120°F) when heating emblem.

CAUTION: Use care when separating the emblem from the body surface to avoid scratching the paint.

4. Using a trim stick C-4755 or equivalent, behind the emblem to separate the adhesive backing from the body.
5. Clean adhesive residue from body with MOPAR(R) Super Clean solvent or equivalent.