Front Wheel Speed Sensor - Installation

INSTALLATION





NOTE: When installing, do not rotate sensor, as this may cause the sensor to rub on the tone ring and be damaged.

1. Install the wheel speed sensor to the vehicle.
2. Install the wheel speed sensor (1) through the brake shield and to the hub/bearing (3).
3. Install the wheel speed sensor wire hold down routing clips.
4. Install the wheel speed sensor mounting bolt (2) to the hub (3). Tighten the mounting bolt to 8 Nm (71 in. lbs.).
5. Install the disc brake rotor Brake Rotor - Installation.
6. Install the disc brake caliper adapter. Disc Brake Caliper Adapter - Installation.
7. Install the tire and wheel assembly Removal and Replacement.