Rear

REAR





The fluidic rear washer nozzle (1) is constructed of molded plastic. The rear washer nozzle is secured by two integral latch features (3) within a mounting hole integral to the Center High-Mounted Stop Lamp (CHMSL) on the outer liftgate panel above the liftgate glass opening. The domed outer surface of the washer nozzle is visible on the exterior surface of the CHMSL lens, and the nozzle orifice (5) is oriented downward towards the liftgate glass.

A rubber gasket (2) seals the nozzle to the outer surface of the CHMSL lens. The washer plumbing fitting (4) for the washer nozzle extends behind the lamp and is concealed between the liftgate inner and outer panels.

The rear washer nozzle cannot be adjusted or repaired and, if ineffective or damaged, it must be replaced.