P0630

P0630-VIN NOT PROGRAMMED IN PCM

For a complete wiring diagram Refer to Diagrams/Electrical.


- When Monitored:
While the key is on.

- Set Condition:
The VIN was not calibrated into the ECM.







Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Initial Inspection and Diagnostic Overview


Diagnostic Test


1. VIN NOT CALIBRATED INTO ECM
Using the scan tool, recalibrate the ECM with the proper VIN.
Did the DTC P0630 reset?

Yes


- Replace the ECM.
- Perform POWERTRAIN VERIFICATION TEST (DIESEL). Powertrain Verification Test


No


- Test Complete.