Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2008 >> RAM 3500 Truck 2WD L6-6.7L DSL Turbo >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Head Assembly >> Valve Cover >> Service and Repair >> Removal and Replacement >> Cylinder Head Cover - Installation >> Cylinder Head Cover Gasket

Cylinder Head Cover Gasket







CYLINDER HEAD COVER GASKET





1. Clean oil from cylinder head cover gasket
2. Inspect cylinder head cover gasket for cuts or damage. Replace if damaged.
3. Place cylinder head cover gasket on top of rocker housing (2).
4. Install injector solenoid nuts (1) at injectors. Torque to 1.25 Nm ( 11 in. lbs. ).
5. Connect injector harness connectors (3) at cylinder head cover gasket.
pro multis · About Operation CHARM