Carpet - Removal

REMOVAL

NOTE: Carpet for Quad Cab model shown. Regular cab similar.





1. Remove the front seats Seat - Removal .
2. If equipped, remove the floor console Floor Console - Removal .
3. If equipped, remove the three bolts (1) that secure the rear storage compartment (2) to the floor panel (3) and remove the storage compartment from the rear trim panel (4).




4. On Quad Cab models, remove the rear seats (1) Seat - Removal .
5. On Quad Cab models, remove the rear cup holder (2) using a trim stick C-4755 or equivalent.




6. Remove the lower B-pillar trim panels B-Pillar Trim .
7. On Quad Cab models, remove the bolt that secures the lower seat belt anchor to the floor panel near the B-pillars Seat Belt and Retractor - Removal .
8. Remove the retaining screw (1) that secures the jack assembly (2) to the floor panel (3) and remove the jack assembly.
9. Remove the two bolts (4) that secure the jack assembly to the floor panel.




10. For trucks equipped with a scissor type jack, remove the bolts (1) and remove the jack (2).




11. Remove the screws and remove the load floor storage strap snaps (1).




12. On Quad Cab models, remove the eleven push-pin fasteners (1) that secure the rear of the carpet (2) to the floor panel (3).
13. Remove the carpet from the vehicle.