Rear Heater Core - Removal

REMOVAL

WARNING: The heater core tubes are not serviced separately from the rear heater core. The heater core tubes should not be repositioned, loosened or removed from the rear heater core. Failure to follow this warning may result in a coolant leak and serious injury.





1. Disconnect and isolate the negative battery cable. Service and Repair
2. Remove the rear heater-A/C housing and place it on a workbench Rear HVAC Housing Removal.
3. Remove the screw (5) that secures the rear heater core tube bracket (4) to the rear heater-A/C housing (1).
4. Release the two retaining tabs (2) that secure the rear heater core (3) in the rear heater-A/C housing.
5. Carefully pull the rear heater core out of the end of the rear heater-A/C housing. If the foam seals on the heater core are deformed or damaged, they must be replaced.