Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2009 >> RAM 2500 Truck 2WD L6-6.7L DSL Turbo >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Block Assembly >> Harmonic Balancer - Crankshaft Pulley >> Service and Repair >> Removal and Replacement >> Vibration Damper - Installation

Vibration Damper - Installation






INSTALLATION





1. Install the crankshaft damper and bolts. Tighten bolts to 40 Nm (30 ft. lbs.), plus an additional 60°.

NOTE: The damper must be installed so the hole is located over the dowel pin.

2. Install the accessory drive belt Serpentine Accessory Drive Belt - Installation.

pro multis · About Operation CHARM