Rear

DESCRIPTION





A blower motor resistor is used on this model when equipped with the manual temperature control (MTC) rear heating-A/C system. Models equipped with the automatic temperature control (ATC) rear heating-A/C system use a blower motor power module, instead of the blower motor resistor Rear Blower Motor Power Module - Description.

The rear blower motor resistor is mounted to the inboard side of the rear heating-A/C housing, located on the right side of the vehicle. The rear blower motor resistor consists of a molded plastic mounting plate (1) with an integral wire connector receptacle (2). Concealed behind the mounting plate are resistors (3) located between a two-piece stamped steel heat sink (4).

The rear blower motor resistor can be accessed for service without removing the rear heater-A/C housing.