Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2011 >> Durango 2WD V6-3.6L >> Repair and Diagnosis >> Steering and Suspension >> Sensors and Switches - Steering and Suspension >> Sensors and Switches - Steering >> Steering Wheel Heater Switch >> Service and Repair >> Heated Steering Wheel Switch - Installation

Heated Steering Wheel Switch - Installation






INSTALLATION

NOTE: Take the proper precautions to protect the face of the A/C-heater control, center bezel and the instrument panel switch pod from cosmetic damage while performing this procedure.





1. Position the instrument panel switch pod (2) onto the center bezel (3).
2. Install the four screws (1 and 4) that secure the instrument panel switch pod to the center bezel. Tighten the screws securely.
3. Install the instrument panel center bezel Instrument Panel Bezel - Installation.
4. Connect the negative battery cable.
5. Initiate the Actuator Calibration function using a scan tool
6. Verify proper heated steering wheel operation.

pro multis · About Operation CHARM