Second or Third Row

BULB - SECOND OR THIRD ROW






NOTE: The second and third row seating incandescent dome and the aimable Light Emitting Diode (LED) map/reading lamps are integral to the dome lamp housing (1) in the headliner above the second and third row seating. The dome lamp is turned ON and OFF by the door ajar switches or by the interior lighting thumbwheel of the headlamp switch. The LED map/reading lamps are turned ON or OFF independently by the two map/reading lamp push button switches integral to the dome lamp housing. The incandescent dome lamp bulb is serviceable; however, the LED map/reading lamps as well as the switches, the lamp housing, the lens and the wiring are serviced only as a unit with the dome lamp assembly.

1. Disconnect and isolate the battery negative cable.
2. Insert the tip of a small flat-bladed screwdriver between one side of the dome lamp lens (2) and the lamp housing (1).
3. Gently pry the lens downward until it unsnaps from the housing.





4. Remove the lens from the lamp housing (1) to access the bulb (2).
5. Firmly grasp and pull the base of the bulb straight out of the dome lamp socket within the dome lamp housing.