Second Row, Stow-n-Go

REMOVAL






NOTE: On leather trimmed seats, the seat cushion cover can be removed from the back foam pad. On cloth trimmed seats, the seat cushion cover does not separate from the back foam pad

1. Remove the seat cushion side shields Seat Cushion Side Shields - Removal.
2. Remove the retaining clip (1) near the J-clip (2) located in the front underside of the seat. Repeat on the opposite side.





3. Detach the J-clip (1) securing the seat cushion to the seat frame, located in the front underside of the seat. Repeat on the opposite side.





4. Detach the J-clip (1) securing the seat cushion to the seat frame, located in the front underside edge of the seat.





5. Disengage the J-straps (2) that secure the seat cushion cover to the seat frame (1), located under the side of the seat. Repeat on the opposite side.





6. Detach the three J-clips securing the rear portion of the seat cushion / foam (1) to the seat frame, located in the rear underside edge of the seat.
7. Push/pull the rear portion of the seat cushion (1) forward.





8. Remove the retaining clip (2) near the handle. Repeat on the opposite side of the seat.
9. If equipped, pull the cover/foam up and disconnect the heated seat harness.
10. Remove the seat cushion cover/foam (1) from the cushion frame.
11. If required, separate the seat cushion cover from the foam by disengaging the locking strips from the keepers.