Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2011 >> RAM 1500 Truck 4WD V8-5.7L >> Repair and Diagnosis >> Transmission and Drivetrain >> Transfer Case >> Seals and Gaskets >> Service and Repair >> Front Output Shaft Seal - Installation

Front Output Shaft Seal - Installation






INSTALLATION

Special Tools:






1. Install the new front output shaft seal with Seal Installer.
2. Install the front output shaft seal slinger with Oil Slinger Installer. Install the slinger onto the shaft until the tool contacts the rear of the output shaft.
3. Install a new seal boot clamp onto the seal boot.
4. Install the seal boot and clamp onto the slinger hub and tighten the clamp with Axle Clamp Installer.
5. Install front propeller shaftDrive Shaft - Installation.
pro multis · About Operation CHARM