Second Row - Left

SECOND ROW - LEFT

WARNING: To avoid serious or fatal injury during and following any seat belt or child restraint anchor service, carefully inspect all seat belts, buckles, mounting hardware, retractors, tether straps, and anchors for proper installation, operation, or damage. Replace any belt that is cut, frayed, or torn. Straighten any belt that is twisted. Tighten any loose fasteners. Replace any belt that has a damaged or ineffective buckle or retractor. Replace any belt that has a bent or damaged latch plate or anchor plate. Replace any child restraint anchor or the unit to which the anchor is integral that has been bent or damaged. Never attempt to repair a seat belt or child restraint component. Always replace damaged or ineffective seat belt and child restraint components with the correct, new and unused replacement parts listed in the Chrysler Mopar(R) Parts Catalog. Failure to follow these instructions may result in possible serious or fatal injury.





1. Move the second row left seat to the fully rearward position.
2. Move the second row right seat to the fully forward position.
3. Remove the screw (1) that secures the trim (2) over the buckle (3) anchor to the right rear corner of the left seat frame.
4. Remove the trim over the buckle anchor from the right rear corner of the left seat frame.





5. Remove the screw (1) that secures the buckle lower anchor (3) to the left seat frame.
6. Disengage the buckle from the elastic loop (2) of the left seat cushion trim cover and remove the buckle unit from the seat.