Part 2

DISASSEMBLY

31. Remove 2/4 clutch retainer (1)(Figure 28).










32. Remove 2/4 clutch return spring (1)(Figure 29).










33. Remove 2/4 clutch pack(Figure 30). Tag 2/4 clutch pack for reassembly identification.










34. Remove tapered snap ring (3)(Figure 31).










35. Remove low/reverse reaction plate (1)(Figure 32).










36. Remove one low/reverse clutch disc (1)(Figure 33).










37. Remove low/reverse reaction plate snap ring (2)(Figure 34).










38. Remove low/reverse clutch pack(Figure 35).










39. Remove transfer gear cover-to-case bolts (1)(Figure 36).










40. Remove transfer gear cover (1)(Figure 37).










41. Install (6259) (3)(Figure 38).










42. Remove transfer shaft gear-to-shaft nut (3)(Figure 39) and coned washer (2).










43. Using (L-4407A) (1, 3)(Figure 40), remove transfer shaft gear.










44. Remove transfer gear shim (select) (3)(Figure 41).










45. Remove bearing cup retainer (2)(Figure 42).










46. Remove transfer gear bearing cone using (5048) with (5048-4)and (L-4539-2)(Figure 43).










47. Remove transfer shaft bearing cup from retainer using (6062A) (2)(Figure 44).










48. Using (6051A) (1)(Figure 45), remove transfer shaft bearing snap ring (2).










49. Using (5049-A) (1)(Figure 46), remove transfer shaft (2) from transaxle.










50. Slip bearing cup (1) and oil baffle (4) off of shaft (3)(Figure 47).










51. Using (P-334) (3)(Figure 48), press transfer shaft bearing cone (4) off of shaft (2).










52. Bend output gear retaining strap (1)(Figure 49) ears flat to allow bolt removal.
53. Remove output shaft stirrup strap bolts (3).










54. Remove stirrup (3)(Figure 50) and strap (2).










55. Install (6259) (2)(Figure 51).