Rear Washer Nozzle - Description

REAR





The fluidic rear washer nozzle is constructed of molded plastic and includes an integral check valve. The rear washer nozzle is secured by two integral latch features (3) within a mounting hole to the left of the Center High-Mounted Stop Lamp (CHMSL) in the lower surface of the brow above the liftgate glass opening in the outer liftgate panel.

The outer surface of the washer nozzle is visible on the lower exterior surface of the liftgate, and a rubber gasket (1) seals the nozzle to the spoiler mounting hole. The nozzle orifice (2) is oriented downward towards the liftgate glass. The washer plumbing fitting (4) is concealed between the liftgate inner and outer panels.

The rear washer nozzle cannot be adjusted or repaired and, if ineffective or damaged, it must be replaced.