Upper

INSTALLATION

Standard Cab





1. Position the upper trim (1) back in place and seat the clips fully.
2. Install the turning loop bolt (2) and tighten to 40 Nm (30 ft. lbs.).
3. Install the turning loop cover.
4. Install the lower B-pillar trim. B-Pillar Trim Panel - Installation

Quad Cab





1. Position the seat belt through the hole in the trim.
2. Position the upper trim (1) back in place and seat the clips fully.
3. Install the turning loop bolt (2) and tighten to 40 Nm (30 ft. lbs.).
4. Install the turning loop cover.
5. Install the grab handle bolts and tighten to 5 Nm (44 in. lbs.).
6. Seat the grab handle bolt caps fully.
7. Install the lower B-pillar trim. B-Pillar Trim Panel - Installation