Rear Suspension Coil Spring(s) - Installation

COIL SPRING






NOTE:
All torques should be made with the full vehicle weight on the ground being supported by the tires.

1. Position spring (3) and isolator (2) on the axle and align into the spring upper pocket.

2. Carefully raise the rear axle into place.





3. Install the shock lower bolt (3) and nut, and do not tighten.

4. Remove the holding fixture for the rear axle.

5. Remove the support and lower the vehicle.

6. Tighten shock lower bolt (3) and nut to specifications Rear Suspension Specifications.