Load Floor

LOAD FLOOR

REMOVAL




1. Move the rear seat cushion (1) to the up position.
2. Remove the two nuts (2) that secure the rear of the load floor (3) to the floor panel.




3. Move the load floor (2) to the up position.
4. Remove the two bolts (3) that secure the load floor to the floor panel (1) and remove the load floor.
5. If required, remove the support cylinder (4), Refer to Utility Storage Compartment.

INSTALLATION




1. If removed, install the load floor support cylinder (4).
2. Position the load floor (2) into the vehicle and install the two bolts (3) that secure it to the floor panel (1). Tighten the bolts to 40 N.m (30 ft.lbs.).




3. Move the load floor (3) to the down position and install the two nuts (2) that secure the load floor to the floor panel. Tighten the nuts to 25 N.m (18 ft.lbs.).
4. Move the rear seat cushion (1) to the down position.