Exciter Ring Installation

Aligning Exciter Ring:

Align tab on excitor ring with slot in differential case. Start two ring gear bolts through the case into the ring gear to ensure case to ring gear bolt hole alignment.

CAUTION: Tab on excitor ring MUST BE aligned with slot in differential case.

Installing Exciter Ring:

Press the excitor ring on the differential case using the ring gear as a pilot. Apply Stud and Bearing Mount EOAZ-19554-BA (ESE-M4G167-A2) or equivalent to ring gear bolts.

install ring gear bolts and tighten to 95-115 Nm (70-85 ft-lbs).