Attachment III - Technical Information

Air Intake Duct and Valve Assembly 1993 and 1994 Ranger 2.3L OHC

Removal

1. Open hood, cover right fender

2. Disconnect vacuum hose from air cleaner assembly cover.

3. Loosen clamp and disconnect heat tube (leading from exhaust manifold) from air intake tube assembly.

4. Remove air intake tube assembly forward duct retaining screw from grill opening reinforcement.

5. Using a large screwdriver, pry duct out of air cleaner assembly and remove air intake tube assembly from vehicle.

Installation





1. Position air intake tube assembly and snap duct into air cleaner assembly.

2. Position forward duct to grill opening reinforcement and install retaining screw.

3. Connect heat tube leading from exhaust manifold to air intake tube, position clamp and tighten.

4. Route and connect vacuum hose to air cleaner assembly cover.

5. Remove fender cover and close hood.