C1226 Shorted Red Brake Warning Lamp Failure

C1225

POSSIBLE SOURCE(S):
- Shorted bulb.
- Short to vehicle battery voltage in the wiring between the red brake warning lamp and the antilock brake control module.
- Defective lamp driver circuit in the antilock brake control module.

C1226

POSSIBLE SOURCE(S):
- Low fluid.
- Short to ground at antilock brake control module Pin 16.
- Defective lamp driver circuit in the antilock brake control module.
- Defective bulb check switch (IGN crank only).

ACTION(S) TO TAKE:
- Go to Pinpoint B.