End Play Check

1. Insert End Play Checking Tool T80L-7902-A into the torque converter pump drive.
(1) Position End Play Checking Tool T80L-7902-A.
(2) Tighten the inner post until the tool is securely locked.





2. Attach Dial Indicator With Bracketry TOOL-4201-C to End Play Checking Tool T80L-7902-A.
- Position the dial indicator bottom on the converter pump drive hub and zero the dial.





3. Lift up on End Play Checking Tool T80L-7902-A and note the dial indicator reading.
- If the reading exceeds end play limits, replace the torque converter.

Torque Converter End Play
New or Rebuilt: 0.355-1.04 mm (0.014-0.041 inch) Max.
Used: 0.355-1.87 mm (0.014-0.074 inch) Max.

4. Remove the dial indicator and tool.