Headlamp Switch: Service and Repair

REMOVAL







1. Disconnect the battery ground cable.







2. Turn the headlamp switch to the headlamp position and pull the knob.







3. Insert a thin tool to release the headlamp switch knob and remove it.







4. Turn the headlamp switch knob 180 degrees and install it.







5. Turn the headlamp switch knob until the back of it is in the off position.







6. Turn the headlamp switch knob fully clockwise and pull out the headlamp switch.







7. Remove the headlamp switch.
1 Disconnect the connectors.
2 Remove the headlamp switch.

INSTALLATION







1. Install the headlamp switch.
1 Connect the connectors.
2 Install the headlamp switch.

NOTE: When installing a new replacement switch, connect the electrical connectors and snap the switch into the instrument panel.







2. Install the headlamp switch knob.







3. Connect the battery ground cable.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.