Battery Cables - 7.3L Diesel Engines
Battery Cables - 7.3L Diesel EnginesREMOVAL
1. Disconnect the battery cables. Refer to Battery Disconnect.
2. Remove the nuts.
3. Remove the battery ground cable screw.
4. Remove the pin-type retainer from the battery tray.
5. Remove the pin-type retainers from along the top of the radiator support bracket and remove the nuts.
6. Remove the pin-type retainer on the top of the LH frame rail.
7. Remove the bolt from the left front of the engine block.
8. Remove the RH battery cable harness.
1 Remove the nut and remove the positive starter cable and bracket.
2 Remove the stud and remove the ground cable eyelet.
9. Remove the screw.
10. Remove the starter motor solenoid terminal cover.
11. Disconnect the starter motor connections.
1 Remove the nut and disconnect the solenoid cable.
2 Remove the nut and disconnect the starter motor positive cable.
12. Remove the battery cable harness assembly.
INSTALLATION
1. To install, reverse the removal procedure.