Crew Cab

Safety Belt Bolt Bit:

SPECIAL SERVICE TOOL(S)

REMOVAL







1. Remove the shoulder strap guide.
1 Position the shoulder strap guide cover up.
2 Use the Seat Belt Bolt Bit to remove the bolt.
3 Remove the shoulder strap guide.
2. Position the rear seat back forward.
3. Remove the utility tray, if necessary.
4. Remove the rear door scuff plate and the rear corner trim panel.







5. Remove the safety belt retractor.
1 Use the Seat Belt Bolt Bit to remove the bolt.
2 Remove the safety belt retractor.







6. Remove the safety belt anchor.
1 Use the Seat Belt Bolt Bit to remove the bolt.
2 Remove the safety belt anchor.

INSTALLATION

















1. Follow the removal procedure in reverse order.

NOTE:
^ Make sure the safety belt webbing is not twisted prior to installation.
^ Make sure to tighten bolts to specification.

2. Check the restraint system for correct operation.