Rear

Rear Disc


Removal and Installation


All except Ford single rear wheel axle


1. NOTE: The brake disc is part of the wheel hub on all axles except the Ford 10.50-inch axle for single rear wheel applications. Removal of the hub on a Dana or Ford axle refer to: "Steering and Suspension / Suspension, Wheel Hub" Wheel Hub

Remove the Hub.


2. Remove the rotor-to-hub bolts and separate the hub and rear disc brake rotor.






Ford Single Rear Wheel Axle


3. Remove and support the caliper and anchor plate assembly. Remove the anchor plate bolts.






All Vehicles


4. Remove the disc.

5. To install, reverse the removal procedure.