Cable Bracket

REMOVAL







1. Remove the left hand side accelerator control splash shield bolts.







2. Remove the right hand side accelerator control splash shield bolt and remove the splash shield.
3. Disconnect the speed control cable. Refer to Cruise Control.







4. Disconnect the accelerator cable from the throttle lever.
1 Rotate the throttle lever forward.
^ Slide the accelerator cable end from the throttle lever.







5. Depress the locking tabs and remove the accelerator cable from the accelerator cable bracket.
6. Remove the spring from the accelerator cable bracket.







7. Remove the bolts and remove the accelerator cable bracket.

NOTE: For clarity, the air intake duct is not shown in this illustration.

INSTALLATION

















1. Follow the removal procedure in reverse order.