Radiator: Service and Repair

Removal

1. Drain the cooling system.
2. Remove the air cleaner outlet tube.





3. Position the (A) overflow tube clamp back and disconnect the (B) radiator overflow tube from the (C) radiator filler neck.
4. Remove the fan shroud.





5. Position the hose clamp back and disconnect the upper radiator hose from the radiator.





6. Position the hose clamp back and disconnect the lower radiator hose.





7. Disconnect the two transmission cooling lines.





8. Remove the bolts.





9. Remove the bolt.





10. Squeeze to release the buckle.





11. Squeeze to release the anti rattle clip.





12. Slide the A/C condenser out of the locations.
13. Lift the radiator up.
14. Lift the radiator up and remove from the vehicle.

Installation





1. To install, reverse the removal procedure.