Safety Belt Replacement Label

WARNING:
^ WHENEVER THE YELLOW PORTION OF THE LABEL IS VISIBLE, THE SAFETY BELT MUST BE REPLACED.
^ FAILURE TO FOLLOW THESE INSTRUCTIONS WILL AFFECT THE PERFORMANCE OF THE SAFETY BELTS AND INCREASE THE RISK OF PERSONAL INJURY.
^ AFTER ANY VEHICLE COLLISION, THE SAFETY BELT SYSTEM AT ALL OUTBOARD SEATING POSITIONS (EXCEPT DRIVER, WHICH HAS NO "AUTOMATIC LOCKING RETRACTOR" FEATURE) MUST BE CHECKED BY A QUALIFIED TECHNICIAN TO VERIFY THAT THE "AUTOMATIC LOCKING RETRACTOR" FEATURE FOR CHILD SEATS IS STILL FUNCTIONING PROPERLY, IN ADDITION TO OTHER CHECKS FOR PROPER SAFETY BELT SYSTEM FUNCTION. A BELT AND RETRACTOR ASSEMBLY MUST BE REPLACED IF THE SAFETY BELT ASSEMBLY'S "AUTOMATIC LOCKING RETRACTOR" FEATURE OR ANY OTHER SAFETY BELT FUNCTION IS NOT OPERATING PROPERLY WHEN CHECKED ACCORDING TO THE PROCEDURES. FAILURE TO REPLACE THE BELT AND RETRACTOR ASSEMBLY COULD INCREASE THE RISK OF INJURY IN COLLISIONS.







Safety Belt Replacement Label Location
The short plastic boot on the front safety belt at the passenger outboard anchor location covers a "Replace Belt" label on the safety belt.

In the event of a collision the colored label ("Replace Belt") may become visible. If this occurs, a new safety belt must be installed.