C-Pillar Trim Panel

C-PILLAR TRIM PANEL

REMOVAL







1. NOTE: Inspect the safety belt D-ring cover for damage. If the safety belt D-ring cover does not remain in place, install a new cover.

Remove the safety belt D-ring cover.







2. Remove the safety belt D-ring bolt.







3. Remove the pin-type retainers and the liftgate scuff plate trim panel.
4. Position the liftgate weatherstrip aside.







5. If equipped, remove the cargo net hold-down.







6. Remove the rear quarter trim panel.
1 Insert a tape-wrapped screwdriver between the D-pillar trim panel and rear quarter trim panel.
2 Push the screwdriver in the direction of the arrow and remove the rear quarter trim panel.







7. Remove the C-pillar trim panel.

INSTALLATION
1. To install, reverse the removal procedure.