Air Flow Meter/Sensor: Service and Repair
MASS AIR FLOW (MAF) SENSORREMOVAL
1. Disconnect the battery ground cable.
2. Disconnect the mass air flow (MAF) sensor electrical connector and the air cleaner outlet pipe.
1 Disconnect the MAF sensor electrical connector.
2 Disconnect the air cleaner outlet pipe.
3. Remove the two bolts and the MAF sensor.
INSTALLATION
1. CAUTION: Do not tamper with the MAF sensing elements located in the airflow bypass. Tampering may result in failure.
NOTE: The MAF sensor module and body are calibrated and installed as a unit.
To install, reverse the removal procedure.