Transmission Draining and Filling

Material

Part 1 Of 2:

1. Remove the drain plug and drain the transmission.
^ Position a suitable drain pan under the transmission.
2. Clean and install the drain plug.

Part 2 Of 2:

3. NOTE: Before removing, clean the area around the filler plug.

Remove the filler plug.

4. NOTE: Fill the transmission with the vehicle on a level surface.

Using a suitable oil suction gun, fill the transmission to the correct level with the specified fluid. The fluid must be just below the fill plug hole.
^ Transmission capacity is 2.6 liters (2.8 quarts).
5. Install the filler plug.