Rear Seat Cushion Cover - 20 Percent, Second Row

REAR SEAT CUSHION COVER - 20 PERCENT, SECOND ROW

Removal and Installation
1. Release the seat cushion trim cover J-clips attaching the seat cushion trim cover to the cushion pan.

2. NOTE:
- Use care when separating the seat upholstery from the hook and loop strip, or the hook and loop strip can be torn from the seat cushion foam pad.
- On assembly, make sure to feed the pull strap through the seat cushion trim cover.

Separate the hook and loop strips and remove the seat cushion trim cover from the foam pad.

3. To install, reverse the removal procedure.