Camshaft Roller Follower Removal and Installation

Camshaft Roller Follower

Special Tools And Equipment:

Special Tools

Material:

Material

Removal and Installation
1. Remove the LH and RH valve covers.





2. Rotate the crankshaft until the camshaft for the cylinder being serviced is at base circle.






3. NOTE: Mark each camshaft roller follower to make sure it is returned to its original position.

Using the special tool, remove the camshaft roller followers.

4. NOTE: The camshaft roller followers must be installed in their original positions.

NOTE: Lubricate the camshaft roller followers with clean engine oil.

To install, reverse the removal procedure.