Rear Seat - Four-Door, SuperCab

REAR SEAT - FOUR-DOOR, SUPERCAB

Torx Bit, Safety Belt Bolt:

Special Tool(s)

Removal and Installation







1. Remove the rear seat covers.
1 Remove the jack cover.
2 Remove the pin-type retainer.
3 Remove the outboard trim cover.
4 Remove the inboard cover.







2. Using special tool 501-010, remove the bolt and the safety belt retractor.







3. Remove the 5 bolts and remove the rear seat.
4. To install, reverse the removal procedure.
5. Check the active restraint system for correct operation.