Front Door Window Glass: Service and Repair
WINDOW GLASS - FRONT DOORHeavy Duty Riveter:
Special Tool(s)
Removal and Installation
NOTE: Position the window glass half-way up to gain access to the rivets.
1. Remove the front door trim panel.
2. Remove the watershield.
3. Remove the window glass rear run channel.
1 Remove the bolt.
2 Remove the window glass rear run channel.
4. NOTE:
- Support window glass before removing the rivets.
- To remove the rivets, use a drift punch to remove the steel centers and a 6 mm (1/4 in) diameter drill bit to remove the rivets.
Remove the window glass rivets.
5. Remove the front door window glass through the window opening.
6. To install, reverse the removal procedure.
- Use Heavy Duty Riveter to install the new rivets.